Minn Kota Trolling Motors

Whether it is the primary or secondary form ofAvailable on certain Terrova and Riptide models, it has
propulsion on an angler's boat, a trolling motor is acruise control and a feature that allows fishermen to
self-contained unit that can be lifted up out of therecord a fishing track of up to two miles and store it in
water when not in use. There are times when it ismemory so that it can be precisely retraced on a later
connected to the bow - and sometimes to the stern. Itfishing trip.
has various uses . When used as a secondary formThe Riptide series of trolling motors are saltwater
of propulsion, it's used for trolling for game fish andtrolling motors made for the harsh conditions of
usually mounted on the transom next to the primarysaltwater immersion. Any metal-on-metal interfaces
motor. It allows for more precise positioning of the boatfeature composite bushings for isolation, which reduces
so that the person fishing can cast the bait where thewear and makes the motor very quiet. The tiller
fish are locatedsteering system is customizable in terms of tilt angle
Trolling motors are generally designed with a DCand length. And they offer the Lift-Assist gas-charged
electric motor that uses 12-volt deep cycle batteriesspring which is built-in with the bow mount, which
for power. The motors are sealed into a watertightmakes it easier to lift the motor in and out of the
box at the end of a shaft and are submerged whenwater.
operating . Tiller steering is most common, with speedThe Traxxis is a transom-mounted freshwater trolling
control normally located on the top of the unit. Trollingmotor from Minn Kota, with features designed to
motors controlled by hand attach to the boat withassist in deploying, stowing, steering, and depth
clamps.adjustment. Transom motors have somewhat of a
For smaller watercraft like canoes and kayaks, trollingreputation for being difficult to operate, but the Traxxis
motors may be used as a primary source ofis designed for one-hand stowing with no push buttons
automatic propulsion. Minn Kota, a company based inor release levers. Like the Riptide versions , the tiller
Racine, Wisconsin, is one brand of trolling motors. Thesteering is adjustable in terms of handle angle and
company makes both fresh water and salt waterlength. It also has a cam lock depth adjustment which
motors in over a dozen different models, all of whichis unlike the more typical tension knob depth control. It
have engine shafts made of composite materialsfeatures the Traxxis' depth to be precisely fixed ,
designed for long wear. Minn Kota trolling motors forwithout slipping.
salt water are made with materials that resist saltA high quality trolling motor like those produced by Minn
water corrosion.Kota can make the difference between a successful
Minn Kota also makes the i-Pilot, which is aday on the water and a disappointing one. By allowing
GPS-based control system for some of its trollingfishermen to accurately and quietly maneuver to
motors. It utilizes GPS technology for navigation andwhere the fish are, the motors make angling a more
locating that does not require hands-on operation.precise and enjoyable pastime.